Moeller PS 4-341-MM1 User Manual

3
04/99 AWB 2700-1311 GB
About This Manual
Documentation for
the PS 4-300
The documentation for the PS 4-341-MM1 compact
PLC (referred to below as PS 4-300) is subdivided
into four manuals with the following topics:
Hardware and engineering
User interface for the programming software
Programming
Training guide
Hardware and engineering manual
The “Hardware and engineering” manual explains
how to install and configure the PLC and the settings
that can be made on the PLC.
How to configure and set the PLC parameters in the
topology configurator of the Sucosoft S 40
programming software is described in the “Software
configuration” chapter.
The “Slave addressing” chapter defines the general
syntax rules for addressing the stations in a
Suconet K network.
The “Tests/commissioning/diagnostics” chapter
provides an overview of the possible error and
diagnostic messages and their significance.
User interface for the programming software
manual
The PS 4-300 is programmed using version 3.0 or
higher of the Sucosoft S 40 programming software
(Windows, IEC 1131).
The user interface for the software is described in the
manual AWB 2700-1305 GB and in the
supplementary manual AWB 2700-1337 GB.
H1311g.bk Seite 3 Freitag, 4. Juni 1999 1:12 13

Moeller PS 4-341-MM1 Specifications

General

Brand	Moeller
Model	PS 4-341-MM1
Category	Controller
Language	English