5
04/99 AWB 2700-1311 GB
1 About The PS 4-300 Compact PLC
Hardware and software
requirements
To program the PS 4-300 you need:
A PC (IBM or IBM-compatible) with
Pentium processor
Windows 95, Windows 98 or Windows NT 4.0
1
operating system
16 MB RAM (32 MB recommended)
3.5” disk drive/ 1.44 MByte and CD-ROM drive
Hard disk with at least 50 MB free space; a
temporary directory called C:\{_PS 4_}.TMP is
created and then deleted again during
installation. This requires at least 250 KB free on
drive C:
Serial COM port
Parallel printer port (LPT)
VGA graphics card
ZB 4-303 KB1 programming cable (connecting
cable between the PC and PS 4-300)
Features
The main features of the PS 4-300 are as follows:
24 V DC power supply
16 digital inputs 24 V DC (some are multi-function
inputs for “high-speed counters”, incremental
encoders and for use as alarm inputs.
14 digital outputs 24 V DC
2 analog inputs
1 analog output
1) (die Version 3.x Sucosoft version 3.x is the last version
supported by Windows 3.1x
H1311g.bk Seite 5 Freitag, 4. Juni 1999 1:12 13
To Next Page
Loading...
Need help?
General
