Mohr CT100B Series - Options under the Connect to CT Viewer Menu

6. CT Viewer
Figure 6.1. Options under the Connect to CT Viewer menu.
Figure 6.2. Selecting Manual Connect in the Connect to CT Viewer menu will bring up a
server menu.
6.1.3.3. Manual Connection the First Time
1. From the server menu, Select Add PC . A window with various server settings appears.
2. Use the M-FUNCTION knob to move up and down in the window. Use the on-screen
keyboard or a USB keyboard to enter values. In PC Name, enter a user-friendly name for the
computer.
3. In PC Address, enter either a network name or an IP address for the computer.
4. Do not change the default port number.
5. Press OK to save the server entry, then press Select to connect. If the connection is
successful, a message will appear on the CT100B and in CT Viewer 2.
CT100B TDR Cable Analyzers Operator’s Manual 93