Mohr CT100B Series - Transfer and Delete Traces; Loading a Trace

4. Operating Instructions
Figure 4.32. Loading a trace.
Some stored traces, such as FFT traces, require some re-calculation to fully load. This calculation
is done automatically, but it may take several seconds.
4.9.5. Transfer and Delete Traces
The CT100B has a large storage space, capable of holding thousands of scans. However, with
continued use, CT100B storage will eventually fill up. Periodically, an effort should be made to
clear stored traces from the device and free up storage space.
4.9.5.1. Transfer Traces
The CT100B ships with an installation DVD for the CT Viewer™ (Version 2) software for
Windows. Using either a USB or an Ethernet connection, the CT100B can transfer stored scans to
CT100B TDR Cable Analyzers Operator’s Manual 63