3. Getting Started
Table 3.1. SCAN Button and Menu
Menu Selection Purpose/Action
Save/Rename Saves selected trace to internal storage. Renames
previously saved traces.
Showing Sel. Trace Only/Showing
All Traces
Turns all traces invisible except the currently selected
trace. Select again to set all traces visible.
Hide All Traces Hides all traces except the live trace. (If traces were
previously saved, they can be recalled from the FILE
menu; see Section 3.9.6.)
Hide Selected Trace Hides the selected trace. (If trace was previously
saved, it can be recalled from the FILE menu; see
Section 3.9.6.)
Start Scan Initiates cable scan.
Cursor/Snapshot Switches between scan modes:
▷ Cursor ........................... Creates a new scan of the portion of the trace between
cursors using the current resolution and smooth
settings.
▷ Snapshot ......................... Saves trace as currently displayed on-screen.
Annotations Adds/removes annotations for a trace.
▷ Create Annotation Creates a new annotation for the selected trace.
▷ Delete Annotation Deletes selected annotation from the selected trace.
▷ Modify Annotation Modifies the text of an existing annotation.
▷ Save Changes Saves the selected trace with annotations. If the
selected trace is already saved, allows user to rename
trace.
▷ List Annotations Creates a scrolling list of the annotations associated
with a trace.
▷ ▷ Delete Deletes selected annotation from the selected trace.
▷ ▷ Modify Text Modifies the text of an existing annotation.
▷ ▷ View Shows the details of the selected annotation.
▷ ▷ Select Selects the highlighted annotation in the annotation
list.
▷ ▷ Cancel Exits out of annotation list.
▷ Annotations On/Off Toggles display of annotations on and off.
▷ Previous Selects the previous annotation.
▷ Next Selects the next annotation.
Math See Table 3.2: Math Menu.
16 CT100B TDR Cable Analyzers Operator’s Manual
To Next Page
Loading...