3. Getting Started
Figure 3.5. The Reset Options menu.
For more information on default and user configurations, see Section 4.10.
The Reset Options menu can also be found by briefly pressing the red POWER button and
choosing Reset Options when the shutdown dialog appears. It is also part of the CT100B’s startup
screens.
Manual → USB will download a PDF of this manual to a USB drive. Insert a USB drive into the
front panel port of the CT100B and select Manual → USB. A message will appear saying that the
PDF has been successfully copied.
3.9.5. CURSOR Button
The CURSOR button toggles between cursors, making the active cursor inactive and the inactive
cursor active. Pressing and holding the CURSOR button for one second then releasing will
reposition any cursors not visible on the screen to the screen.
3.9.6. FILE Button and Menu
Use this menu to access the user library of configurations, cable types, and cable records. FILE
button menu selections are shown in Table 3.3.
Table 3.3. FILE Button and Menu
Menu Selection Purpose/Action
Custom Cable Types Use to add, select, edit, or delete an entry from the
custom cable type library:
▷ Add New .......................... Enter in new cable type information.
▷ Edit.............................. Modify the selected cable type.
▷ Delete ........................... Delete selected cable type from the library.
20 CT100B TDR Cable Analyzers Operator’s Manual
To Next Page
Loading...