4. Operating Instructions
4.15. Web Server
The CT100B is able to export raw data and images in real time over Ethernet. To enable this
feature, follow this procedure:
1. Select MENU → Settings → Network Settings.
2. Toggle Web Server to On.
3. Press Show IP Config. and note the IPV4 address.
4. Using a web browser, navigate to http://xxx.xxx.xxx.xxx/, where the xxx.xxx.xxx.xxx is
the IPV4 address you noted in step 3.
This web page (Figure 4.40) gives you the following options to choose from:
Figure 4.40. The web server web page.
1. screenshot.bmp. This displays a current snapshot of the screen, ready to download.
2. Live Stream. This displays a live view of the screen, updated multiple times a second.
3. Live Control. This displays the live, updating view of the screen and also allows remote
control of the front panel controls. See Figure 4.41. There is a virtual button on the screen
for each physical button on the front panel of a CT100B, and two virtual buttons for each
knob to simulate turning the knob clockwise and counterclockwise. The computer mouse can
be used to click on these buttons or on virtual “hot spots” like menu options or the
74 CT100B TDR Cable Analyzers Operator’s Manual
To Next Page
Loading...