Need help?Do you have a question about the molex SST-PB3S-CLX-RLL Series and is the answer not in the manual?
General| Brand | molex |
|---|---|
| Model | SST-PB3S-CLX-RLL Series |
| Category | Control Unit |
| Language | English |
This manual is a user's guide for the SST ControlLogix (CLX) PROFIBUS slave module series.
Explains the meaning of special notations like Warning, Caution, and Note used in the guide.
Provides an overview of the SST-PB3S-CLX-RLL module and its capabilities within the ControlLogix system.
Details the physical hardware features of the SST-PB3S-CLX-RLL module, including LEDs and ports.
Outlines the objective of the Quick Start section and the prerequisites for users.
Lists the necessary hardware and software tools required for setting up the module.
Specifies the items included in the SST-PB3S-CLX-RLL slave module package.
Details the power consumption and requirements for the SST-PB3S-CLX-RLL module.
Outlines the steps for setting up and getting the SST-PB3S-CLX-RLL slave module running.
Provides step-by-step instructions for physically installing and removing the slave module.
Explains how to properly wire the SST-PB3S-CLX-RLL module to the PROFIBUS network.
Describes the meaning of the COMM, SYS, and OK LEDs for status indication.
Details various combinations of LED and display states and their meanings.
Explains the PB3S Status Register and its possible error values for diagnostics.
Describes how to find and interpret the slave module's firmware version.
Details the diagnostic counters available for monitoring module activity.
Details the interface image for the slave module, including output and input data areas.
Explains the definitions and layout of registers related to DP slave status and error reporting.
Describes how to add or modify I/O table entries for slave functionality.
Explains how to add entries to the CLX config table for slave functionality.
Covers methods for configuring and programming the CLX slave module.
Lists detailed technical specifications for the SST-PB3S-CLX-RLL modules.
Outlines CE compliance marking and associated warnings for the equipment.
Details compliance with Korean regulatory standards and user notices.
Provides information and links for warranty details.
Lists relevant documents and resources for further information.
Guides users on information to have ready when contacting technical support.
Provides contact methods and web resources for obtaining technical assistance.
To Next Page