User Reference Guide SST-PB3S-CLX-RLL
12 Hardware Overview
©2014 Molex Inc. Industrial Products Business Unit, Integrated Products Division
Document Edition: 1.0, Document #: 715-0109, Template Edition: 1.1, Template #: QMS-06-045
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.
2.1 Hardware Features
The slave’s hardware features are shown below. The LCD displays the firmware version at
power up, and connection status and errors during operation. The three LEDs (COMM, SYS and
OK) display PROFIBUS and module behavior. For more detailed information on LEDs, refer to
Section 4.3, PROFIBUS LED and Display States.
Figure 1: Hardware Features
Status LEDs
Scrolling LCD Display
Configuration Port, 9-pin, male
Profibus Comm. Port, 9-pin, female
Totally-closed, module front panel
To Next Page
Loading...
Need help?
General