molex SST-PB3S-CLX-RLL Series User Manual

SST-PB3S-CLX-RLL User Reference Guide
Installing the SST-PB3S-CLX-RLL Slave 25
©2014 Molex Inc. Industrial Products Business Unit, Integrated Products Division
Document Edition: 1.0, Document #: 715-0109, Template Edition: 1.1, Template #: QMS-06-045
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.
4.2.2 PROFIBUS Connector
The card has one standard PROFIBUS DB9 female connector per channel. Pin numbers are
identified in the following figure.
Figure 2: The PROFIBUS DB9 Female Connector
Note
The recommended male connector is the Brad Harrison PA9D01-42
Diagnostic D-Sub Connector.
The recommended cable is a Belden3079A. Examples include:
• Brad Harrison 85-001 PVR2 conductor with shield, UL-listed PROFIBUS cable
• Bosch Comnet DP #913 548 Flexible PROFIBUS cable
• Bosch Comnet DP #917 201 Trailing PROFIBUS cable
• Bosch Comnet DP #917 202 Massive PROFIBUS cable
Note
Allen Bradley blue hose, which has an impedance of 78 ohms, is not
recommended.

molex SST-PB3S-CLX-RLL Series Specifications

General

Brand	molex
Model	SST-PB3S-CLX-RLL Series
Category	Control Unit
Language	English