EasyManua.ls Logo

MONI LOG EnDal smart - 2. Technical Parameters

MONI LOG EnDal smart
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL PARAMETERS EnDaL smart
- 8 -
2. T E C HN IC AL PAR AM E TER S
Case
Case material
Aluminium, powder-coated
Degree of protection
IP67
Weight
0.8 kg (standard version without batteries)
38g (each magnetic base, 3 pieces per module optional)
Dimensions (H/W/D)
35 x 140 x 100 mm³ (standard version)
Ø25mm x 15mm (small magnetic base)
Mounting type
surface mounting (screw fixing recommended), alternatively magnetic base
mounting (upon request)
Application conditions
Operating and storage
conditions
-20°C to +70°C with alkaline batteries
-40°C to +85°C with Lithium batteries
Data memory, time
Data retention
minimum 10 years (independent of battery condition)
Memory type/size
32 MB flash parameter and data memory
System time
Date / Time as UTC time supported independently from the power
supply by an internal battery,
exchange at SMT & HYBRID after 6 years needed
Voltage supply
Internal
2 batteries of type C or R14 exchangeable
o alkaline batteries (2 x 1.5 V; 8000 mAh)
o Lithium batteries exchangeable (2 x 3.6 V; 8500 mAh)
Service life: at least 1 year (in case of synchronous interval of 10 min,
all options active)
External interfaces
USB
USB 2.0 Client (Mini-USB AB)
Indicating and operating elements
LED
1 green active LED
1 red alarm LED
1 red-green battery LED (bicoloured)
Key button
1 On/Off key