PC SOFTWARE – MONI LOG® ANALYZER EnDaL smart
- 42 -
4 . 3 . 1 1 C o n f i g u r a t i o n o f t h e E n D a L s m a r t
Changing the device name
The name of the device can be changed in the programme tab “Configuration” in the input field
“Device name” (see Figure 31). Up to 16 characters are available for the device name. By
pressing the Enter key of your keyboard or by clicking on the configuration button the new
device name is transferred.
Figure 31: Changing the device name
Setting the recording period:
The desired recording period for the device can likewise be set by the user (see Figure 32). When
a recording period is defined, the measured value recording at the start time begins. The
measured value recording will be terminated when the stop time is exceeded. If the input fields
are not left empty, the measurement recording is running a long as the device is switched on.
The input of start time and stop time is made in local time in the date format:
dd.mm.yyyy hh:mm:ss
(day.month.year hour:minute:second)
The recording period is configured by pressing the Enter key on your keyboard or by clicking on
the button „Transferring the configuration “.
Figure 32: Configuration of the recording period
To Next Page
Loading...