PC SOFTWARE – MONI LOG® ANALYZER EnDaL smart
- 18 -
4. PC S O F TW ARE – A N A L YZ ER
The software Analyzer can be used both for the readout and configuration of the
EnDaL smart and other devices. It is intended for the display and analysis
of the recorded data in tabular and graphic form. Furthermore, data sets can be saved locally on
your PC or loaded from your PC.
4.1 I N S T A L L A T I O N
4 . 1 . 1 G e n e r a l s o f t w a r e i n s t a l l a t i o n
The supplied CD contains the installation of the Software Analyzer. Please start the
installation by double-clicking on the file „setup.exe“, and follow the instructions.
Together with the installation of the evaluation software Analyzer, the required USB
device drive is installed. If the installation of the USB driver was not successful, the driver can be
installed manually. Please refer to chapter 4.1.2 .
To Next Page
Loading...