EnDaL smart INTRODUCTION
- 5 -
1.2 F U N K T I O N A L I T Y
The EnDaL smart is a universal data logger. Developed for long-term measurement
applications, it is perfectly suited for the monitoring of transport goods and critical environments.
The integrated sensor system for the detection of shock events and for the measurement of
temperature, humidity, air pressure, and inclination enables a wide range of different
measurement applications.
Configured alarm thresholds ensure the reliable detection of exceedances of limit values. The
possibility of position determination of the EnDaL smart at events and time-
controlled allows both the verification of the transport route and a precise localisation of critical
transport processes.
The up to 15,000 recorded position data sets,
including speed and direction, can be
imported afterwards into Google Earth or
similar software and be evaluated.
The compact and network-independent design enables
simple fixing on or in transport goods and transport devices.
The case of the device protects against dust and splash water
(degree of protection IP 65) and thus is also suitable for the
exterior use. Thanks to this, the EnDaL smart can be
universally used as an almost invisible goods companion in the
international transport of goods, in storage rooms, at reloading
points and during transport by rail, by roads as well as by water
and by air.
The power supply is realised by customary, exchangeable alkaline or lithium batteries. Thanks
to very low current consumption and associated very long, maintenance-free operating time, the
EnDaL smart is perfectly suited for self-sufficient long-term applications. Energy-
optimised operating settings render possible a self-sufficient operational time of up to one year
under rough ambient conditions.
To Next Page
Loading...