MONI LOG EnDal smart - 3.4 Device Runtime and Battery Change

EnDaL smart DEVICE DESCRIPTION OF MONI LOG® ENDAL SMART
- 13 -
LED
What?
How?
When?
2
nd
L
E
D
?
Meaning
Red
(alarm)
flashing
3x briefly
On/Off key
pressed longer
than 2s
-
device prepares
deactivation
Red
(alarm)
illuminated
while key is
pressed
On/Off key
pressed longer
than 3s
-
device switches off
(LED goes out when key
is released)
Red
(alarm)
flashing
up to 3x briefly
On/Off key
pressed longer
than 2s  and
then released
Green
flashes
briefly
device remains
switched on
Red
(alarm)
flashing
3x briefly, 3x
long, 3x briefly
(SOS)
switching on
Green
Hardware error in the
memory
Red
(alarm)
flashing
3x briefly, 3x
long, 3x briefly
(SOS)
switching on
-
Battery empty, device
switches off again
Red
(alarm)
flashing
5x briefly
switching on
or USB
configuration
Green
main position could not
be determined 
inclination event
inactive
Red
(alarm)
flashing
sustained at
1 Hz
switching on
-
Update mode active or
no valid firmware found
Green
(active)
illuminated
while pressed
status key
pressed
others
possible
device is active and
records data
Green
(active)
not
illuminated
while pressed
status key
pressed
others
possible
device is inactive, it is
before the time of
activation or after the
time of deactivation
(no data are recorded)
Green
(active)
while pressed
status key
pressed
others
possible