EasyManua.ls Logo

Morbark BEEVER M15R - Page 79

Morbark BEEVER M15R
131 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE
76347-281 12-08 3.37
Safety
Loose clothing, long hair, dangling jewelry may get
entangled in moving parts and cause serious injury. Do
not get near or wear loose items near moving parts.
The muffler becomes hot during operation. Contact with
the muffler may cause burns.
Removing the radiator cap while the engine is hot can
cause the coolant to spray out, seriously scalding you.
Always let the engine cool down before removing the
radiator cap.
WARNING!
Follow the manufacturers recommended procedure when using
starting aids in cold temperatures.
Use of plain water alone as a coolant will result in liner pitting and
corrosion. Always have the proper mix of coolant. Artificially softened
water should not be used in the radiator.
Moisture in the fuel system has an impact on engine performance and
results in corrosion.
Function
The engine is the source of power for the machine.
The M15R chipper has many options for its engine. Consult the engine
manufacturers manual for the safety, use, and maintenance of your
specific engine. The engine drive belt, sheaves, air filter, and muffler will
vary with each model. See the Parts section for part numbers on the
engines and their components.
Features and Function Components Engine

Table of Contents