Morbark BEEVER M18R - The Chipping Cycle Section 2

2.1
76347-282 • 12- 08
Section 2
The Chipping Cycle
Preparation
Preparation and Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
Start-up
Fluid Levels .........................................2.6
Engine Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6
Chipping the Wood
Feeding Brush into the Chipper . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8
Shut-down
Machine Shut-down...................................2.9
Lock-up ............................................2.9
Clean-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9
Checklist
Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.10
Shut-down .........................................2.10