3.5
76347-282 • 12- 08
1. Adjustable deflect
Easily adjustable discharge deflect with four locking positions.
2. Discharge chute
Used to change the direction of the discharge. Capable of 360º rotation.*
3. Muffler
Reduces engine noise.*
4. Fuel shut-off valve
Shuts off the flow of fuel to the engine.
5. Hydraulic oil filter
Helps keep oil clean.
6. Fuel and hydraulic oil gauges and filler cap
The oil and fuel gauges indicates the level of each fluid. The filler caps
are where the fuel and hydraulic oil are added.*
7. Feed wheel chain guard
Safely guards against entanglements with the feed wheel chain.
The guard
must be attached during operation.
8. Manual holder
Storage compartment for product manuals. Keep all the manuals with
the machine at all times. Use the manuals to refer to safety, features
and functions, parts, and maintenance.
9. Flag holder
Holds safety clearance flags.
10. Tool box
Lockable container for electrical pin connector and other tools.*
11. Axle
Provides suspension and braking for the chipper.*
12. Tire and rims
13. Radiator screen
The screen keeps debris from plugging the engine radiator.*
14. Jack
Lifts and levels the chipper during the towing/hook-up process.
15. Hitch and chains
Fastens the chipper to a towing vehicle.*
16. Drum locking pin
Prevents chipper drum from turning when performing knife
maintenance. This is a critical safety lockout feature.
17. Deflect handle
Changes the angle of the adjustable deflect.
*Feature varies depending on the model you have ordered, see the options tabs for details on your model.
Features and Function • The Basics • Left View
To Next Page
Loading...