ELI 250/210__________________________________________________________________________
A-8
When the LCD displays the above message, the unit is ready to receive the ECGs from the transmitting
electrocardiograph. Follow the instructions on transmitting records as described in this section. The receiving unit
only acts as a printer. Received ECGs will not be viewed or stored. To terminate the receiving mode, press the
STOP key.
Note: The ELI 250 will receive records from Mortara model cardiographs except for
Mortara’s Portrait. The Mortara model cardiographs (ELI 100, ELI 200, Landscape,
and Portrait) will not receive the ELI 250 records.
Retrieve ECGs
It is possible to retrieve ECGs from the E-Scribe Data Management System using any of the connectivity options.
Before attempting to retrieve ECGs, please configure the Default XMT Media, the telephone number (if using
modem transmission) and the site number (see Section 3). Select Retrieve ECGs (5) from the Application Menu.
The following screen appears:
Note: The ID field defaults the last acquired ECG
To Next Page
Loading...
