User Guide - v11 41
6 HARDWARE SPECIFICATION
This chapter details the hardware specifications for the HD Interceptor Camera.
Codec specification
Video codec
• Full frame rate, full colour: H.264/MJPEG ; up to 25fps (ISO 14496-10)
• User-configurable bit rates from 64Kbps up to 8Mbps
• Up to 8Mbps total video output; Unlimited multicast connections. Up to two 4Mbps
unicast connections
• Up to two simultaneous resolutions including: 1080p (25fps), 720p (25fps), D1 (25fps),
SIF (25fps)
Resolution
• 1920x1080 pixels (1080p)
• 1280x720 pixels (720p)
• 720x576 pixels (D1)
• 352x288 pixels (SIF)
Sensor specifications
Sensor 1/1.9” Sony Exmor
Active pixels (HxV) 2MP (1920 x 1080)
Horizontal resolution >800 TVL
Minimum sensitivity Day: 0.002 Lux (color). Night: 0.0002 Lux (mono). 30 IRE, F1.6, 1/30s shutter
Dynamic Range WDR 120dB Max
Signal to noise ratio >50dB
Gain control Exposure Offset of -10.5 to +10.5dB
White balance mode Outdoor Auto, Auto, Outdoor, Indoor, Auto Tracing, Indoor A/B/C, Sodium,
Sodium Auto A/B
Lens options 6mm - 216mm Horizontal view angle 1.8°(T) - 60°(W)
Shutter speeds Rolling; Plus Fast Shutter config for Off and 1/1000 to 1/30000
Zoom 36x optical plus 12x digital
IRIllumination IR250W=250m IR + 250m White Light
To Next Page
Loading...
Need help?
General
