2 Enter a name for the camera, and select the type of street the camera is monitoring.
3 Verify the location and direction of the camera.
4 To update location and direction of the camera information in the Set Camera Location screen,
select Change.
5 Perform one of the following actions:
• Skip to the section relevant to the power solution selected for this installation site:
• Solar Panel Installation on page 39
• AC Power Installation on page 42
• DC Power Installation on page 43
• Skip to Camera Installation on page 45 if using the swappable battery only.
MN008660A01-AC
Chapter 3 : Hardware Installation
38
To Next Page
Loading...
Need help?
General
