Motorola APX 1500 - Chapter 26: User Login Feature; Logging in as a User

Chapter 26
User Login Feature
This feature allows you to take on a friendly username such as Text Messaging Service (TMS).
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
This feature is only applicable for Land Mobile Radio (LMR) Messaging.
NOTE: Valid characters for a username entry are capital letters (A–Z), small letters (a–z),
numbers (0–9), symbols (*, #, -, /), and the space character.
The maximum length for a username is eight characters. Usernames are not case-sensitive in
server mode but are case-sensitive in non-server mode.
A predefined username can be invalid because the programming software used to set
predefined usernames allows you to set usernames comprising eight characters or more.
26.1
Logging In as a User
Procedure:
1 Press the User menu item.
2 At the User Login screen, use one of the following options:
Option Actions
Entering the user name using the
keypad
a Select [ID Entry] and press Edit.
b Enter the user name.
c To submit, press OK.
Selecting a predefined user name
a Select the required predefined user name.
b Press Sel.
Selecting a predefined user name
using fast scroll
a For fast scroll through the list, press and hold the
Up or Down button.
b Select the required predefined user name.
c Press Logn.
NOTE: If the selected predefined username has more than eight characters, or an invalid
character in it, the display momentary shows Invalid ID.
3 Press PIN.
4 Enter your Personal Identification Number (PIN) number.
The maximum PIN length is four digits. The PIN number appears as asterisks.
5 Press Logn.
One of the following scenarios occurs:
• In ARS Server Mode, the display shows the User Login Indicator icon, the ID, and In progress,
with Cncl.
68012006035-FA
User Login Feature
101