Chapter 23
Message
You can send a message to a dispatcher to request or indicate a significant occurrence. Your radio
is capable of transmitting as many as 16 predefined messages. You can select the message from
a programmed list by scrolling through the list or searching through the index. The message is
transmitted by pressing the Push-To-Talk (PTT) button.
23.1
Sending Messages
Procedure:
1 Press the Msg menu item.
2 Perform one of the following actions:
• Select the required message.
• Enter a number corresponding to the location in the message list.
3 To send a message, press the PTT button.
4 To return to the Home screen, press the Home button.
No traffic is heard on trunked channels while Message is selected. If the radio detects no
message activity for 6 s, an alert tone sounds until you press the Home or PTT button.
If acknowledgment is received, your radio shows the following indications:
• Four tones sound.
• The display shows Ack received.
NOTE: If the Display Last Acknowledged User Status/Message is enabled, the display
shows the last acknowledged message.
If acknowledgment is not received, your radio shows the following indications:
• A tone sounds.
• The display shows No acknowledge.
68012006035-FA
Message
97
To Next Page
Loading...
