Icon Description
The text entry is in lowercase with predicted words shown at the bottom of the screen.
The text entry is in mixed case and with predicted words shown at the bottom of the
screen.
The text entry is in uppercase with predicted words shown at the bottom of the screen.
5.2.5
LED Indications
The LED indications represent the operational status of your radio.
Table 9: LED Indications
Indication Status
Solid red Radio is transmitting.
Double blinking red Radio is transmitting an emergency alarm or call.
Rapid blinking red Radio has failed the self-test upon powering up or encountered a fatal
error.
Solid yellow Radio is receiving in both trunking and conventional clear mode.
NOTE: The yellow LED illuminates only when the Busy LED
feature is enabled through Customer Programming Software
(CPS).
Blinking yellow Radio is receiving a secured transmission.
Solid green Radio is powering up or is on a non-priority channel while in the Scan List
Programming mode.
Blinking green Radio is receiving an individual or telephone call or is on a Priority-Two
channel while in the Scan List Programming mode.
Rapid blinking green Radio is on a Priority-One channel while in the Scan List Programming
mode.
5.2.6
Intelligent Lighting Indicators
This feature temporarily changes the display backlight color and the alert text background color of the
radio to help signal that a radio event has occurred.
Backlight and
Bar Color
Notification When
Red Critical Alerts The radio is out of range.
The radio enters Failsoft mode.
The radio is unable to establish a full connection with
the system.
The radio is unable to authenticate or register with the
system.
68012006035-FA
Chapter 5 : Home Screen Overview
39
To Next Page
Loading...
