Motorola APX 1500 - Chapter 32: Dynamic Zone Programming; Saving Channels in the Dynamic Zone; Deleting Channels in the Dynamic Zone

Chapter 32
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.
NOTE: Your radio must be programmed for you to use this feature. At least one zone in the
radio must be a nondynamic zone.
32.1
Saving Channels in the Dynamic Zone
Procedure:
1 Enter a dynamic zone by performing the following actions:
a Press the Zone menu item.
b Select <# Dynamic Zone Channels> and press Sel.
The radio returns to the Home screen and displays the selected Dynamic Zone Channel.
2 Press the ZnPr menu item.
3 Press Edit.
4 Select List Selection and press Sel.
5 Select the required zone and press Sel.
6 Select the required channel and press Sel.
7 To return to the Home screen, press Exit.
32.2
Deleting Channels in the Dynamic Zone
Procedure:
1 Enter a dynamic zone by performing the following actions:
a Press the Zone menu item.
b Select <# Dynamic Zone Channels> and press Sel.
The radio returns to the Home screen and displays the selected Dynamic Zone Channel.
2 Press the ZnPr menu item.
3 Select the required saved dynamic channel and press Del.
4 To return to the Home screen, press Exit.
The Home screen shows <Dynamic Zone Channels>. If the deleted channel is the home channel,
the Home screen shows <Zone Name>”Blank”.
68012006035-FA
Chapter 32 : Dynamic Zone Programming
114