Motorola APX 1500 - 34.3 Changing the Tactical Inhibit Password

If the two passwords do not match, repeat step 3 to step 5.
NOTE: If you enter three incorrect old passwords, the radio exits the password feature. You
cannot access this feature again until you turn the radio off and on.
34.3
Changing the Tactical Inhibit Password
The Tactical Inhibit Password is required for the Radio Stun and Radio Kill features.
Procedure:
1 Press the Pswd menu item.
2 Select Tactical Inh Encode Pswd and press Sel.
3 Enter the old password and press OK.
4 Enter the new password and press OK.
5 Reenter the new password and press OK.
The password is updated.
If the two passwords do not match, repeat step 3 to step 5.
NOTE: If you enter three incorrect passwords, the radio exits the password feature. You cannot
access this feature again until you turn the radio off and on.
68012006035-FA
Chapter 34 : Radio Lock
120