Chapter 22
Status
The Status feature allows you to send data calls to the dispatcher about a predefined status. Each
status can have up to a 14-character name. For trunking, a maximum of eight status conditions are
possible. For conventional, a maximum of 16 status conditions are possible.
22.1
Sending Status
Procedure:
1 Press the Sts menu item.
2 Perform one of the following actions:
• Select the required status.
• Enter a number corresponding to the location in the status list.
3 To send the status, press the PTT button.
4 To return to the Home screen, press the Home button.
If acknowledgement is received, your radio shows the following indications:
• Four tones sound.
• The display shows Ack received.
NOTE: If the Display Last Acknowledged User Status/Message is enabled, the display
shows the last acknowledged status.
If acknowledgement is not received, your radio shows the following indications:
• A tone sounds.
• The display shows No acknowledge.
No traffic is heard on trunked channels while Status is selected. If the radio detects no Status activity
for six seconds, an alert tone sounds until you press the Home or PTT button.
68012006035-FA
Chapter 22 : Status
96
To Next Page
Loading...
