Motorola APX 1500 - Chapter 6: General Radio Operation; 6.1 Selecting Zones; 6.2 Selecting Channels

Chapter 6
General Radio Operation
This chapter explains the general operations of your radio.
6.1
Selecting Zones
A zone is a group of channels.
Option Actions
Select a zone using the programmed Zone (3-
Position A/B/C) switch
Move the programmed Zone (3-Position
A/B/C) switch to the position of the required
zone.
NOTE: If the zone number entered
is unprogrammed, the display Model
1.5 shows INVALID, and the display
for Model 2.5 and Model 3.5 shows
Invalid entry. Repeat this step.
Select a zone using the Zonemenu item
Select a zone using the ZnUp and ZnDn but-
tons
Procedure:
1 Perform one of the following actions:
• Move the programmed Zone (3-Position A/B/C) switch to the position of the required zone.
• Press the Zone menu item and select the required zone.
• Press the Zone menu item and enter the required zone number.
2 Press Sel.
6.2
Selecting Channels
A channel is a group of radio characteristics, such as transmit or receive frequency pairs.
Procedure:
Select radio channels by using the following options.
Option Actions
Selecting radio channels using the Multi-
Function Knob
Perform one of the following actions:
• If the channel is set as the primary mode,
rotate the Multi-Function Knob until the
display shows the required channel.
68012006035-FA
Chapter 6 : General Radio Operation
42