Chapter 21
Quik Call II
This feature allows you to broadcast a series of distinct and recognizable tones before a voice
transmission from the dispatcher or a radio.
The broadcasting dispatcher or radio user can select this programmed Quik Call II tone transmission to
be sent to an individual talkgroup or over the entire system. Each tone is distinctive to indicate different
situation or different broadcaster.
NOTE: The receiving radio must be configured with the matching Quik Call II tone from the
transmitting radio, in order for the receiving radio to sound the selected tone followed by the
preconfigured alert tone.
21.1
Initiating Quik Call II Transmissions
Prerequisites: Program tones into the Tone Signaling List on broadcasting and transmitting radios.
Procedure:
1 Press the QCII menu item.
2 Select the required broadcast tone.
3 Initiate Quik Call II Transmissions by using one of the following options:
Option Actions
Broadcasting the selected tone Press the PTT button.
Broadcasting the selected tone and making
a call
a Press and hold the PTT button.
b Wait for the tone to end and speak into
the microphone.
c To listen to the call, release the PTT but-
ton.
68012006035-FA
Quik Call II
95
To Next Page
Loading...
