14.3.3.1
Pairing the Authentication PIN when Receiving a Pairing Request
Procedure:
1 When the display shows a pair request, press Ok.
Your radio only supports HSP, DUN, GAP, PAN, and SPP Bluetooth profiles.
The display shows Compare PIN: XXXXXX.
2 Press Ok if the pin is correct.
Scenario Outcome
If pairing is successful, your radio displays Pairing in pro-
gress...., <Device Friendly Name>
paired followed by <Device Friendly
Name> connected.
If pairing is unsuccessful when the pairing
timer expires,
your radio displays <Device Friendly
Name> pair failed.
If pairing is unsuccessful when the connect-
ing timer expires,
your radio displays <Device Friendly
Name> connect failed.
If the PIN is correct but the profiles are not
supported,
your radio displays BT profiles not
supported and returns to Home screen.
NOTE:
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
14.3.3.2
Pairing the Authentication PIN with the Generated Numeric PIN
Prerequisites: Follow the procedure in Searching and Pairing Bluetooth Devices on page 77 to search
for available Bluetooth devices.
Procedure:
1 To initiate pairing, select the required device and press Sel.
Your radio only supports HSP, DUN, GAP, PAN, and SPP Bluetooth profiles.
If successful, the display shows Pairing in progress... followed by a randomly
generated numeric PIN, Compare PIN: XXXXXX.
If unsuccessful, the display shows BT profiles not supported and returns to the
Available Dev screen.
2 To continue pairing your radio and the device, press Ok.
68012006035-FA
Chapter 14 : Connectivity
78
To Next Page
Loading...
