Motorola APX 3000

Troubleshooting Charts: Bluetooth Failure – Pairing Issue 5-49
Bluetooth Failure – LCD Indication (Page 3)
Resolved
6
Connect radio to PC and
read the codeplug
BT Audio Reroute
programmed in the
code plug?
PTT on headset
produces low -tone
from radio
Connect an audio
accessory (e.g. DRSM)
on the radio side
connector to check
whether the audio had
been re-routed to
different path.
No
Yes
No
No
No
Audio heard through
side connector
accessory without
headset paired ?
No
Go to RX Audio flowchart
(5.6 or External Speaker
Audio Out Failure)
Yes
Yes
Yes
Determine what button is
programmed for BT audio
re-route from the
codeplug and press it
Audio heard through
BT headset?
No
Power off the POD headset, then slightly
turn and press firmly on the earpiece
connector to ensure it is making good
connection to the POD. Power on the POD
headset and re-pair it with the APX radio.
Audio heard through
BT headset?
No
7