MN000770A01-AA July 30, 2014
Codeplug Configuration: Overview 3-5
Figure 3-4. Enabling Secondary Radio Transmission
3.1.5 Configuring Cross Band Mute Operation
The Cross Band Mute Operation causes the speaker of the unselected radio in an APX Dual-Radio
configuration to remain muted to receive audio, when the currently selected radio is transmitting
voice and both radios are operating in a “cross-band” combination (operating in completely different
frequency bands). This feature works on a Radio Wide basis.
When disabled, the unselected radio is still able to unmute to receive audio, when the currently-
selected radio is transmitting in a “cross-band” combination.
Figure 3-5. Cross Band Mute Operation Configuration
To Next Page
Loading...
Need help?
General