Motorola CP185 - Radio Programming and Tuning; CPS Programming Setup; Radio-to-Radio Cloning

Chapter 5 Radio Programming and Tuning
5.1 Introduction
This chapter provides an overview of the CP185 Series Customer Programming Software (CPS) and
the CP/EP/P Tuner as designed for use in a Windows
®
2000/XP/Vista environment. Both cover all the
functions of the traditional Radio Service Software (RSS) package.
They are both available in the CP185 Series CPS and Tuner CD-ROM (RVN5194_).
5.2 CPS Programming Setup
Refer to online help files for the CPS Programming procedures.
(See Figure 5-1. CPS Programming Setup for CPS Programming Setup).
5.3 Radio-to-Radio Cloning
1. Cloning is the process of copying the content of one radio (source radio) into another radio
(destination radio). Radio content refers to system-type features such as frequency, squelch type
option, etc.
2. The cloning can be done only if all the following conditions are met:
a. The source radio's serial number cannot be blank.
b. The source radio and the destination radio must have the same model number.
c. The source radio and the destination radio must have an identical major codeplug
version.
Figure 5-1. CPS Programming Setup
USB
Same Cable
Program Cable PMDN4077_R
2.5mm stereo
USB connection