Motorola CP185 - Figure 7-5. Speaker Wire and Flexible Cable Connection; Figure 7-6. Speaker Wire Removal

Maintenance – Non Keypad Model: Disassembling and Reassembling the Radio 7-9
c. Slide the rear chassis downwards, and away from the front housing. Be careful not to
damage the Flexible Cable (34) and speaker wire underneath. (Refer Figure 7-5).
d. Remove the speaker wire connector connecting the main circuit board and the internal
speaker on the front housing with the tweezers. (Refer Figure 7-6)
e. Lay the front housing down. Rotate the chassis sideways from the Front Housing
Assembly (1) and lay it down.
Figure 7-5. Speaker Wire and Flexible Cable Connection
Note:
The speaker wire and flexible cable connector connecting the Front Housing Assembly (1)
and the Chassis (23) prevent the two units from being completely separated
Figure 7-6. Speaker Wire Removal
Speaker Wire
Flexible Cable
Speaker Connector