Maintenance – CP185: Disassembling and Reassembling the Radio – General 6-9
4. Remove the LCD (34), Poron Pad (40) and Keypad (39) from the Front Housing.
(Refer Figure 6-11).
6.4.1.4 Speaker Disassembly
1. Remove the screw holding the Speaker Retainer (8) to the Front Housing with a Phillips
screwdriver.
2. Remove the Speaker Retainer from the Housing.
3. Remove the Speaker from the Housing with a flat head screwdriver.
4. Remove the Speaker Insulator (9) from the speaker.
Figure 6-11. LCD and Keypad Removal
Note:
The poron pad will be damaged during disassembly. A new poron pad is needed for
reassembly.
Note:
Be careful not to damage the Speaker Wire when removing the Retainer Bracket.
Poron Pad
LCD
Keypad
To Next Page
Loading...
