Motorola CP185 - Front Panel Feature and Button Configuration Mode (Keypad Models Only); Introduction; Entering Programming Mode; Exiting Programming Mode

5-18 Radio Programming and Tuning: Front Panel Feature and Button Configuration Mode (Keypad Models Only)
5.9 Front Panel Feature and Button Configuration Mode (Keypad
Models Only)
5.9.1 Introduction
This mode allows you to change the feature parameters to enhance the use of your radio.
5.9.2 Entering Programming Mode
Make sure the radio is turn off. Press Side Programmable Button 1 (top side programmable button),
and turn ON the radio. A tone is heard, indicating that the radio is in Programming Mode. The
indicator illuminates and the "BCKLIGHT" is displayed on the radio LCD.
5.9.3 Exiting Programming Mode
Turn off the radio to exit Programming Mode.
5.9.4 Accessing Front Panel Programming Mode Parameters
Press or to scroll through the parameters for each menu or sub-menu item, or
Press PTT to select the menu or sub-menu item, or
Press Side Programmable Button 1 to either return to previous menu level or to exit the selection
parameter without change.
Note
Please use the CPS to program additional setting on the radio.