Motorola CP185 - Figure 6-5. Speaker Wire and Flexible Cable Connection; Figure 6-6. Speaker Wire Removal

6-6 Maintenance – CP185: Disassembling and Reassembling the Radio – General
c. Slide the rear chassis downwards, and away from the front housing. Be careful not to
damage the Flexible Cable (35) and speaker wire underneath. (Refer Figure 6-5).
d. Remove the speaker wire connector connecting the main circuit board and the internal
speaker on the front housing with the tweezers. (Refer Figure 6-6).
e. Lay the front housing down. Rotate the chassis sideways from the Front Housing
Assembly (1) and lay it down.
Figure 6-5. Speaker Wire and Flexible Cable Connection
Note:
The speaker wire and flexible cable connector connecting the Front Housing Assembly (1)
and the Chassis (23) prevent the two units from being completely separated
Figure 6-6. Speaker Wire Removal
Speaker Wire
Flexible Cable
Speaker Connector