EasyManua.ls Logo

Motorola CP185 - Editing Front Panel Programming Mode Parameters; Table 5-6. Front Panel Programming Mode Parameters: Non-MDC1200 & Non-QCII Models

Motorola CP185
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Radio Programming and Tuning: Front Panel Feature and Button Configuration Mode (Keypad Models Only) 5-19
5.9.5 Editing Front Panel Programming Mode Parameters
A. Non-MDC1200 and Non-QCII Models
Table 5-6. Front Panel Programming Mode Parameters: Non-MDC1200 & Non-QCII Models
Main Menu
1st Level
Sub-Menu
2nd Level
Sub-Menu
Setting Remarks
BCKLIGHT
(Backlight)
AUTO
TOGGLE
AUTO – Backlight Off if no keypress for more than
5 seconds.
Pressing the Backlight button again prolongs
illumination time.
TOGGLE – Allows Backlight Button to toggle
control the ON/OFF status of the backlight.
BATTERY SAVER
(Battery Saver)
OFF
NORMAL
ENHANCED
Helps to extend battery life. When enabled, turns
off the radio receiver circuitry periodically when
no activity is detected.
NORMAL – turns off radio less frequently; select
this to save battery when expecting to receive
Selective Call or Call Alert.
ENHANCED – turns off receiver for a longer
duration; select this to maximize battery saving
with no Selective Call or Call Alert.
TYPE
(Battery Type)
NIMH
LI-ION
H LI-ION
Select type of battery radio uses.
NIMH – Nickel Metal Hydride
LI-ION – Lithium-Ion
H LI-ION – High Capacity Lithium-Ion
ACCESORY
(Accessory)
SPK GAIN
(External
Speaker
Gain)
+2
+1
0
-1
-2
Volume Adjustment – External Speaker .
+2: maximum external speaker gain
-2: minimum external speaker gain
MIC GAIN
(External
Microphone
Gain)
+2
+1
0
-1
-2
Sensitivity Adjustment – External microphone.
+2: maximum external microphone sensitivity
gain
-2: minimum external microphone sensitivity gain
TONE VOL
(Alert Tone
Volume)
ON
OFF
Alert tone volume preference.
OFF: No alert tone.
ON: Alert tone is on.
CHANNEL PL Display
(PL Display
Type)
FREQ
CODE
PL Display Type
FREQ – frequency
CODE – code
RX PL
(Receive TPL/
DPL)
CH-001 ...
CH-016
CSQ CSQ
TPL 067.0 ... 001 ...
TPL 254.1 042
DPL 023 or 043
DPL 754 127
TPL 1 TPL 1
TPL 2 TPL 2
TPL 3 TPL 3
Receive PL
Frequency: CSQ, TPL 67.0 – TPL 254.1,
DPL 023 – DPL 754, user defined TPL 1, user
defined TPL 2, & user defined TPL 3
Code: CSQ, 001 – 127, user defined TPL 1,
user defined TPL 2, & user defined TPL 3

Table of Contents

Other manuals for Motorola CP185

Related product manuals