5-20 Radio Programming and Tuning: Front Panel Feature and Button Configuration Mode (Keypad Models Only)
TX PL
(Transmit TPL/
DPL)
CH-001 ...
CH-016
CSQ CSQ
TPL 067.0 001 ...
TPL 254.1 042
DPL 023 or 043
DPL 754 127
TPL 1 TPL 1
TPL 2 TPL 2
TPL 3 TPL 3
Transmit PL
•Frequency: CSQ, TPL 67.0 – TPL 254.1,
DPL 023 – DPL 754, user defined TPL 1, user
defined TPL 2, & user defined TPL 3
•Code: CSQ, 001 – 127, user defined TPL 1,
user defined TPL 2, & user defined TPL 3
SQUELCH
(Squelch Level)
CH-001 ...
CH-016
NORMAL
TIGHT
NORMAL squelch level – receive weak signals.
TIGHT squelch level – receive strong signals and
eliminates unwanted noise.
TIME OUT
(Time
Out Timer)
OFF
010
020
...
590
600
Maximum duration (in seconds) the radio can
transmit continuously.
SCAN LIST 1
(Scan List 1)
01-XXX
02-XXX ...
15-XXX
16-XXX\
_ _ _
001 ...
016
Set Scan List 1 members.
XXX – selected scan list member
_ _ _ – no scan list member is selected
LIST SEL
(Scan List
Select)
CH-001 ...
CH-016
LIST1 (Scan List 1) Set scan list for a selected channel.
SCAN TYP
(Scan Type
Select)
CH-001 ...
CH-016
NORMAL
PRIORITY
Scan type for selected channel – Normal Scan,
Priority Scan
PRIORITY
(Priority
Channel
Select)
LIST1
(Scan List 1)
_ _ _
...
XXX
Set Priority Channel for Scan List 1.
XXX – selected priority channel
_ _ _ – no priority channel is selected
SCRMBLIN
(Voice Inversion
Scrambling)
CHANNEL
(Scrambling
Channel
Select)
CH-001 ...
CH-016
ENABLE
DISABLE
Scrambling – Enable or disable
CODE
(Scrambling
Code
Select)
3.29
3.39
Scrambling code – 3.29 or 3.39.
Table 5-6. Front Panel Programming Mode Parameters: Non-MDC1200 & Non-QCII Models (Continued)
Main Menu
1st Level
Sub-Menu
2nd Level
Sub-Menu
Setting Remarks
To Next Page
Loading...
