B
Connecting an A/V Receiver — Audio
There are several options available for audio connections to your A/V receiver:
• Digital audio (OPTICAL S/PDIF)
• Digital audio (COAXIAL S/PDIF)
• Stereo audio (AUDIO L/R)
If your A/V receiver supports it, the optical (S/PDIF) or coaxial (S/PDIF) digital audio
outputs may be used in place of the stereo audio outputs (AUDIO L/R). These outputs
offer a higher level of audio quality, including support for Dolby Digital audio.
• Digital audio optical (S/PDIF) — Connect the digital optical audio cable to the digital
audio optical connector on the DCX set-top and the optical connector on the A/V
receiver.
• Digital audio coaxial (S/PDIF) — Connect the digital audio cable to the digital audio
coaxial connector on the DCX set-top and the DIGITAL INPUT COAX connector on
the A/V receiver.
• Stereo audio — Connect the stereo audio cable to the AUDIO L/R connectors on the
DCX set-top and the AUDIO L/R connectors on the A/V receiver.
For information on configuring your DCX set-top settings, see Configuring the User
Settings Menu.
4 • Connecting Your DCX
Set-top 16
To Next Page
Loading...
