B
Connecting HDTV — Single Connection for
Video/Audio
Cable In
Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the
DCX set-top.
HDMI
If your TV has an HDMI input, this is for both audio and video if you are using the TV
speakers. Connect a Standard HDMI cable to the TV and to the HDMI connector on your
DCX set-top.
IEEE-1394
If your HDTV has an IEEE-1394 connector, you can use the IEEE-1394 for both your
video and audio connection. Connect an IEEE-1394 cable to the IEEE-1394 connector on
your HDTV and DCX set-top.
Note: On-screen graphics will not be displayed when you are using the IEEE-1394
connection on the rear panel of the DCX set-top. Refer to Section 6 for more information.
If you have an audio/video receiver and are not using your TV’s speakers, go to
Connecting Your DCX Set-top to an A/V Receiver – Audio.
4 • Connecting Your DCX
Set-top 11
To Next Page
Loading...
