B
Connecting an A/V Receiver, SDTV, and VCR/DVD
Recorder
1. Connect a stereo audio cable to the AUDIO OUT L/R connectors on the DCX set-top
and the INPUT L/R connectors on the A/V receiver.
2. Connect an S-Video cable to the S-Video out connector on the DCX set-top and the
S-Video connector on the A/V receiver.
Note: If your A/V Receiver does not support S-Video connections, Composite video
connections may be used.
3. Connect a stereo audio cable to the VCR AUDIO OUT L/R connectors on the A/V
receiver and the INPUT AUDIO L/R connectors on the stereo VCR.
4. Connect a stereo audio cable to the OUTPUT AUDIO OUT L/R connectors on the
stereo VCR and the VCR AUDIO IN L/R connectors on the A/V receiver.
5. Connect a composite video cable to the input video connector on the stereo VCR
and the video VCR OUT connector on the A/V receiver.
6. Connect a composite video cable to the output video connector on the stereo VCR
and the video VCR IN connector on the A/V receiver.
7. Connect an S-Video cable to the input S-Video connector on the Standard-Definition
TV (SDTV) and the TV/monitor output S-Video connector on the A/V receiver.
Note: If your TV or A/V receiver does not support S-Video connections, Composite
connections may be used.
Note: The digital audio optical (OPTICAL S/PDIF) or digital audio (COAXIAL S/PDIF) audio
outputs may be used in place of the stereo audio outputs (AUDIO L/R). These outputs
offer a higher level of audio quality, including support for Dolby Digital audio.
These Video Connection Methods Do Not Support HD Video. If you have an HDTV, See
Connecting HDTV — Single Connection for Video/Audio.
4 • Connecting Your DCX
Set-top 22
To Next Page
Loading...
