B
7
Configuring the
Settings Menu
The following describes how to configure the audio (for HDMI connections) and SD and
HD video settings for the DCX3400.
Note: Additional user settings are configured through the Interactive
Program Guide and not directly through the Settings Menu.
Before you adjust the output settings:
• Connect the DCX3400 to other home entertainment devices.
• Plug the DCX3400 into an AC power outlet.
• Turn the TV on.
When using an HDMI connection between the DCX3400 and the television, be sure to
have the cable connected and the TV powered on before adjusting the video settings.
To optimize the output settings:
1. Ensure the DCX3400 is installed properly.
2. With the set-top in stand-by mode, press the MENU key on the front panel.
3. If the TV is on, the on-screen User Settings menu lists the DCX3400 settings that
can be adjusted.
Figure 3 – Settings Menu
7 • Configuring the
Settings Menu 27
To Next Page
Loading...
