5 - 10 DS6878 Product Reference Guide
Beeper Duration
Parameter # F1 74h
To select the duration for the beeper, scan one of the following bar codes.
Beep on Insertion
Parameter # F0 20h
When a digital scanner is inserted into a cradle and detects power, it emits a short low beep. This feature is
enabled by default.
To enable or disable beeping on insertion, scan the appropriate bar code below.
Short
(00h)
* Medium
(01h)
Long
(02h)
*Enable Beep on Insertion
(01h)
Disable Beep on Insertion
(00h)
To Next Page
Loading...
