EasyManua.ls Logo

Motorola DS6878 - Setup Field(S)

Motorola DS6878
629 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced Data Formatting 16 - 29
Setup Field(s)
Table 16-2
Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character Scan the
Move Cursor To Character on page 16-30
, then any
printable ASCII character from the
Alphanumeric Keyboard on page
16-90
. This moves the cursor to the position after the matching
character. If the character is not there, the rule fails and ADF tries the
next rule.
16-30
Move Cursor to Start of Data Scan this bar code to move the cursor to the beginning of the data. 16-30
Move Cursor Past a Character This action moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is ‘A’, then
the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the
Move Cursor Past
Character on page 16-30
, then select a character from the
Alphanumeric Keyboard on page 16-90
. If the character is not there,
the cursor does not move (i.e., has no effect).
16-30
Move Cursor Past Specific String This action moves the cursor past the first occurrence of a selected
string.
16-30
Move Cursor to Specific String
and Replace
This action moves the cursor to the start of the first occurrence of a
selected string and replaces that string with another user-defined
string.
16-30
Move Cursor to Last Occurrence
of String and Replace All
This action replaces all occurrences of a specific string with a
user-defined string and moves the cursor to the beginning of the last
such occurrence.
16-30
Skip to End This action moves the cursor to the end of the bar code. 16-30
Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions ahead
to move the cursor.
16-32
Skip Back “N” Characters Scan one of these bar codes to select the number of positions back to
move the cursor.
16-33
Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
Table 8-4 on page 8-20
.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
16-33

Table of Contents

Other manuals for Motorola DS6878

Related product manuals