Chapter 7 USB Interface
Introduction
This chapter provides instructions for programming the cradle to interface with a USB host. The digital scanner
cradle connects directly to a USB host, or a powered USB hub. The USB host can power the cradle and recharge
the digital scanner battery, but this charging method has limitations. See Using the USB Interface to Supply Power
on page 1-9.
Throughout the programming bar code menus, default values are indicated with asterisks (
*).
*North American Standard USB Keyboard
Feature/Option
* Indicates Default
NOTE The CR0078-S cradle has the ability to be powered by the USB port instead of an external power supply.
The CR0078-P can only receive power via an external power supply.
To Next Page
Loading...
