Motorola DS6878 - Composite Beep Mode; GS1-128 Emulation Mode for UCC;EAN Composite Codes

Symbologies 15 - 75
Composite Beep Mode
To select the number of decode beeps when a composite bar code is decoded, scan the appropriate bar code.
GS1-128 Emulation Mode for UCC/EAN Composite Codes
Select whether to enable or disable this mode.
Single Beep After Both are Decoded
(00h)
*Beep as Each Code Type is Decoded
(01h)
Double Beep after Both are Decoded
(02h)
NOTE For HC configurations, the default is Enable Single Beep After Both are Decoded.
Enable GS1-128 Emulation Mode for
UCC/EAN Composite Codes
(01h)
*Disable GS1-128 Emulation Mode for
UCC/EAN Composite Codes
(00h)