11 - 4 DS6878 Product Reference Guide
Wand Emulation Parameter Defaults
Table 11-1 lists the defaults for Wand Emulation host types. To change any option, scan the appropriate bar
code(s) provided in Wand Emulation Host Parameters beginning on page 11-5.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 11-1
Wand Emulation Default Table
Parameter Default
Page
Number
Wand Emulation Host Parameters
Wand Emulation Host Types
Symbol OmniLink Interface Controller
1
11-5
Leading Margin 80 msec
11-6
Polarity Bar High/Margin Low
11-7
Ignore Unknown Characters Send
11-7
Convert All Bar Codes to Code 39 Disable
11-8
Convert Code 39 to Full ASCII Disable
11-9
1
User selection is required to configure this interface and this is the most common selection.
To Next Page
Loading...
