Motorola DS6878 - Hands-Free Decode Aiming Pattern

5 - 34 DS6878 Product Reference Guide
Hands-Free Decode Aiming Pattern
Parameter # F1h, 4Eh
Select Enable Hands-Free Decode Aiming Pattern to project the aiming pattern during bar code capture,
Disable Hands-Free Decode Aiming Pattern to turn the aiming pattern off, or Enable Hands-Free Decode
Aiming Pattern on PDF to project the aiming pattern when the digital scanner detects a 2D bar code.This
parameter does not apply to Snapshot Mode. See Modes of Operation on page 5-11.
NOTE With Picklist Mode on page 5-24 enabled, the decode aiming pattern flashes even when the Decode Aim-
ing Pattern is disabled.
Enable Hands-Free Decode Aiming Pattern
(01h)
Disable Hands-Free Decode Aiming Pattern
(00h)
*Enable Hands-Free Decode Aiming Pattern on PDF
(02h)