Motorola DS6878 - Page 553

Standard Default Parameters A - 9
GS1-128 (formerly UCC/EAN-128) Enable 15-28
ISBT 128 Enable 15-28
ISBT Concatenation Disable 15-29
Check ISBT Table Enable 15-30
ISBT Concatenation Redundancy 10 15-30
Code 39
Code 39 Enable 15-31
Trioptic Code 39 Disable 15-31
Convert Code 39 to Code 32 (Italian Pharmacy Code) Disable 15-32
Code 32 Prefix Disable 15-32
Set Length(s) for Code 39 2 to 55 15-33
Code 39 Check Digit Verification Disable 15-34
Transmit Code 39 Check Digit Disable 15-34
Code 39 Full ASCII Conversion Disable 15-35
Buffer Code 39 Disable 15-35
Code 93
Code 93 Disable 15-38
Set Length(s) for Code 93 4 to 55 15-38
Code 11
Code 11 Disable 15-40
Set Lengths for Code 11 4 to 55 15-40
Code 11 Check Digit Verification Disable 15-42
Transmit Code 11 Check Digit(s) Disable 15-43
Interleaved 2 of 5 (ITF)
Interleaved 2 of 5 (ITF) Disable 15-44
Set Lengths for I 2 of 5 14 15-44
I 2 of 5 Check Digit Verification Disable 15-46
Transmit I 2 of 5 Check Digit Disable 15-46
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.